Welcome to our new and updated website! - we hope you like the improvements. Any feedback or suggestions gratefully received - tell us at newtheme@marine-deals.co.nz

Seaflo Accumulator Pressure Boost System 8L

(2)
#9159883

Seaflo Accumulator Pressure Boost System 8L

(2)
#9159883
Check Below for Availability
Seaflo Accumulator Pressure Boost System 8L 15LPM 12V
15LPM 12V
In Stock - Ready to Ship
$269
$319.00
SAVE $50.00!
Seaflo Accumulator Pressure Boost System 8L 15LPM 24V
15LPM 24V
Hurry! 2 left in stock - Ready to Ship
$269
$299.00
SAVE $30.00!
Seaflo Accumulator Pressure Boost System 8L 18.9LPM 12V
18.9LPM 12V
In Stock - Ready to Ship
$319
$329.00
SAVE $10.00!
Seaflo Accumulator Pressure Boost System 8L 18.9LPM 24V
18.9LPM 24V
Out of stock
$269
$319.00
SAVE $50.00!

Delivery options

Deliver to:
Auckland 0626, NZ
Estimated: $0.00
2-hour Click & Collect:
(order before 3pm, in-stock products only)

Buy now, pay later & Finance Options

Find Local Store
Report incorrect product information
Smooth and quiet operation

The Seaflo Accumulator Pressure Boost System is a fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 5 chamber diaphragm pump, strainer and pre-pressurised accumulator tank with quick connect electrical connections on a rubber mounted board. Serves 3 or more 1/2" (13mm) outlets.

Seaflo Accumulator Pressure Boost System Features:
  • Smoother flow, quieter water systems
  • Longer pump life, lower battery drain
  • Self-priming up to 6 feet(1.8m)
  • Five chamber diaphragms for smooth and quiet operation
  • Can be installed vertically or horizontally accumulator tank
  • Maintenance free potable water quality accumulator tank
  • Complies with USCG 183.410 and ISO 8846 MARINE(Ignition Protection)
  • 16 AWG, 4.5" long leads

Seaflo Accumulator Pressure Boost System Specifications:

General
  • Typical Applications: Marine, RV, filtration
  • Type: 5 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
  • Control Type: Pressure switch
  • Max Recommended Temperature: 60° C (40° F)
  • Priming Capabilities: 6 feet (1.8 m) suction lift
  • Re-start Pressure: Shut-on Pressure 20 PSI :20 PSI ±3 PSI | Shut-off Pressure 60 PSI :60 PSI ±3 PSI
  • Inlet/Outlet Ports: 1/2"-14 MNPT
  • Weight: 11.9 lbs (5.4 kg)
  • Tank volume: 8L
  • Wire connections: 2-Pin/leads

Motor
  • Leads: 14 AWG, 13" (33 cm) long with 2-Pin connector/leads
  • Duty Cycle: Continuous
  • Max.Amp Draw: 18.9 A
  • Fuse: 28.4 A

Standard Pump Configurations

ModelVoltageOpen Flow (GPM/LPM)Pressure On (PSR/BAR)Pressure Off (PSI/BAR)Max Draw
SFWSK1-040-060-002112V4.0 / 15.020 / 1.460 / 4.213.0A
SFWSK2-040-060-002124V4.0 / 15.020 / 1.460 / 4.27.0A
SFWSK1-050-060-002112V5.0 / 18.920 / 1.460 / 4.217.0A
SFWSK2-050-060-002124V5.0 / 18.920 / 1.460 / 4.29.0A
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.
Loading...
Loading...
Loading...