CruzPro V-55 Voltmeter
CruzPro V-55 Voltmeter
Buy now, pay later & Finance Options
Find Local Store
The CruzPro V55 Digital Volts Gauge provides accurate low cost digital instrumentation for batteries between 9.5 and 33 Volts.
High and Low volts alarms can be set using the front panel switches. The alarm can be turned ON/OFF with the press of a single key. When activated, the built-in 85 dB alarm will sound and the display will flash.
The V55 draws only 0.017 amps and can be left on continuously.
Outputs digital voltage data in NMEA 0183 serial data line format. This information can be used to log performance or repeat the display information at a remote location on the CruzPro RP60 and/or RP110 data repeaters.
5 levels of backlight (including OFF) can be selected from the front panel.
The units are factory calibrated, if required this can be adjusted over a wide range using the front-panel switches to suit your particular needs. All calibration data is saved to non-volatile memory.
Available with round or square bezels.
Specifications:- Operating Voltage: 9.5 - 33.0 VDC (Higher voltage versions available by special order)
- Current Drain: 0.018 amps nominal
- Display: 4 digit LCD, 5 levels of backlighting
- Data: Digital volts, high and low voltage alarm display
- Ranges: 9.5 to 33.0 VDC Custom OEM versions to 60VDC
- Data Output: NMEA 0183 serial 4800 BAUD, $IIXDR,V
- Alarms: Built-in 85 dB audible alarm. Settable independent high and low voltage alarms
- Size: 2.5'' dia X 4.1'' deep (61mm x 104mm)
- Mounting: 2-1/8'' (55mm) round hole
User Manual