Gear up and go

This Week's Deals Expire In:

00 Hours 00 Minutes 00 Seconds
Up (Cylinders) ▲

VETUS MTC30 Kit

#9118505
Warranty Badge - 12-Months
Ships Dec 21 - Feb 1
Calculate Shipping
Australia Wide
includes any items in cart
ONLY $1,519.00

Seen a lower price? Ask us to beat it

Add Items to Cart

💬 Report incorrect product information

VETUS MTC30 Kit

Click on the image above to view full picture

Details

Details

As an attractive solution for smaller boats, VETUS now offers a complete steering kit at a very competitive price.
This kit (code MTC30KIT) includes:
  • Pump type HTP2010 (white)
  • Fittings to connect to diameter 8 mm hose
  • Cylinder type MTC3008
  • Nylon hose diameter 8 mm type HS04N (15 metre roll)
  • Hydraulic steering oil type VHS1 (1 litre)
  • All required fittings


  • VETUS has many years experience with these components, ensuring a reliable and professional quality kit.
    All parts are manufactured to the highest standards using the best materials, for long service life, corrosion resistance and operating efficiency.
    The pump is of the axial piston type, with internal pistons that are directly actuated by the steering wheel; the most reliable system for safe hydraulic steering.
    The cylinder is of the double-acting type and mounted on a base, allowing it to swing according to the arc described by the rudder arm.

    The new MTC30KIT replaces previously individually available components - MTC3008 cylinder and HTP2008 / HTP3008 pumps. Therefore, the following codes are now discontinued:
    HTP2008 - HTP2008B - HTP2008R - HTP2008RB - HTP3008 - HTP3008B - HTP3008R - HTP3008RB.
    All steering pumps fitted with 10 mm compression fittings are still available and can be supplied with 8 mm fittings - please see the table below for the product codes.
    All hoses and accessories will also remain available in both 8 and 10 mm.

    Specifications
  • Max. Torque: 294 Nm (30 kgm) (216 ft.lbs)
  • Wheel turns: 3.4
  • Stroke 150 mm
  • Volume 67 ccubic metre
  • Length of tiller arm 129 mm
  • Pump shaft: diameter 3/4' with 1:12 taper

  • Now available:
    MTC30KITHydraulic steering kit incl. cylinder (MTC3008), pump (HTP2010), diameter 8 mm nylon hose (15 metre roll), diameter 8 mm fittings and 1 litre hydraulic oil
    To replace an existing pump, order the appropriate size pump with 10 mm fittings and the following components:
    HS1010MS:Set of 2 compression fittings for diameter 8 mm hose to replace diameter 10 mm fittings in the pump.
    HS1011S: Set of 2 compression fittings for diameter 8 mm hose to replace diameter 10 mm fittings in the pump. Pack of 20 hose inserts to fit diameter 8 mm hose.
    Specifications:
Stroke (mm) 150
Cylinder volume (ccubic metre) 67 mcubic metre
Length of tillerarm (mm) 129
Weight (kg) 8
Max. torque (Nm) 294Nm (30 kgm, 216 ft.lbs)
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.

Products You Recently Viewed

Recently Viewed