CTEK MXS 5.0T Battery Charger and Comfort Indicator Pack with Carry Case 12V 5A

The smart way to charge your batteries

The CTEK MXS 5.0T Battery Charger and Comfort Indicator Pack comes with everything you need to make sure your batteries are well charged and always on-the-go. This set comes with the MXS 5.0T Battery Charger which is perfect for use on batteries from 1.2–110Ah. The Comfort Indicator Outlet allows you to check your battery levels in the most convenient way possible. Plus, it comes with a FREE carry case to store and protect your CTEK charger and comfort indicator. It's the ultimate grab and go charger for your boat, car or RV. Get yours now!

Promo Pack Includes:

• CTEK MXS 5.0T 12V 5A 8-Stage Battery Charger
• CTEK Comfort Indicator Eyelet M8 8.4mm
• CTEK Carry Case

The Battery Charger
Revive your boat's ailing battery with the help of the CTEK MXS 5.0T 8-Stage Battery Charger. The MXS 5.0T is a fully automatic "connect-and-forget" charger which provides unrivalled performance on lead-acid batteries. It offers intelligent features including battery diagnosis to establish if your battery can receive and retain a charge, an automatic desulphation step and a special reconditioning step that will revive and restore deeply discharged and stratified batteries. What's more, it has a built-in automatic temperature compensation mode which ensures the MXS 5.0T works great even in the most extreme conditions. It's user-friendly and connecting it to your battery is impossible to get wrong. Should you make a mistake, a red error lamp will light up to tell you to connect it properly. The MXS 5.0T is safe for you and your batteries so hook this up to your boat's batteries and keep them topped up and ready whenever you need them.

Intelligent programs and functions
The MXS 5.0 uses a unique and patented technology which charges batteries in an optimal way. There are three different programs and functions which can be used to ensure that your battery lasts longer.

Charging and maintenance charging
The MXS 5.0 charges your battery using a unique 8-stage process which supplies the right voltage to the battery at the right point in time in the charging cycle. The charger also automatically switches to maintenance charging for batteries left charging for more than ten days.

Reconditioning program
The program rectifies acid stratification through charging the battery at a higher voltage. The acid and water are therefore mixed through a controlled process. It's recommended that you recondition your battery once a year to ensure performance is maintained.

Charging in the cold and AGM batteries
A higher charge voltage is required at low temperatures. The program therefore increases the charging voltage to 14.7 volts instead of 14.4. This program is also excellent for AGM batteries.

The Comfort Indicator Eyelet
The CTEK Comfort Indicator Eyelet is a practical combination of quick connector and indicator for those with batteries that are difficult to access. It shows how much power is left in the battery and when you need to charge it. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery.

8-Stage Battery Charging:

• Step 1: Desulphation - pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity
• Step 2: Soft Start - tests if the battery can accept charge. Charging begins if the battery is OK
• Step 3: Bulk - charging with maximum current until approximately 80% battery capacity
• Step 4: Battery ready to use - charging with declining current to maximise up to 100% battery capacity
• Step 5: Analyse - tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced
• Step 6: Recond - reconditioning function for deeply discharged batteries
• Step 7: Fully charged battery - maintaining the battery voltage at maximum level by providing a constant voltage charge
• Step 8: Maintenance charging - maintaining the battery at 95–100% capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged

CTEK MXS 5.0T 8-Stage Battery Charger Features:

• Fully automatic 8-step charger
• Provides fully automatic charging and can be left attached for months
• Spark-proof and reverse polarity protected to ensure safety and vehicle electronics are not harmed during charging
• Charges, conditions and maintains all types of lead acid batteries: wet, MF, AGM, GEL, Dry and Calcium
• Energy-efficient charges that extend battery life, reducing unnecessary replacement and waste

CTEK MXS 5.0T 8-Stage Battery Charger Specifications:

• Charging voltage: 14.4/14.7/15.8 V
• Charging current max: 5A
• Battery capacity: 1.2–110 Ah, up to 160 Ah for maintenance
• Ripple: < 4%
• Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
• Battery size: 1.2-110AH up to 160ah for maintenance
• Insulation: IP65 (splash and dust proof)
• Weight: 0.6kg
• Dimensions (LxHxW): 168 x 65 x 38mm

CTEK Comfort Indicator Eyelet Specifications:

• Part number: 56-382
• Eyelet: M8 (8.4mm)
• Cable length: 55cm
• Fuse: 10A
• Insulation class: IP65
• Compatible with CTEK MS 5.0 Charger

Indicator lights:

• Red: battery charge is below 12.4 volts (time to charge the battery)
• Yellow: battery charge is between 12.4 and 12.65 volts (time to start thinking about charging the battery)
• Green: battery charge is more than 12.65 volts

Note: Designed for single battery charging and maintenance.