Athanor Portable Gas Water Heater Califont 6LPM
Athanor Portable Gas Water Heater Califont 6LPM
Buy now, pay later & Finance Options
Find Local Store
Enjoy hot water anywhere
The Athanor Portable Gas Water Heater Califont makes cleaning up after a day's adventure in the outdoors a breeze. Featuring adjustable temperature, water flow, and showerhead ideal for showering, washing the dishes, and removing mud or saltwater from your equipment. To operate, simply connect to your water source and LPG gas cylinder, and open the showerhead to activate the heater. Water will heat to your desired temperature up to 45°C, which is shown on the LED display. Safety features include a temperature sensor to stop the water temp from exceeding 50°C, and a water flow sensor that only enables the burner to work when water is flowing.
Athanor Portable Gas Water Heater Califont Features:- Powered by LPG Gas
- LED Temperature Display
- Easy to set up
- Adjustable temperature and water flow
- Heats to a maximum of 50°C
- Shower head supplied
- Hanging kit with mounting hardware included
- Hangs upright
- 2 x standard D cell batteries are required
- Gas bottle compatible
- Comes with mounting kit for permanent/temporary mounting on wall
- Comes with gas regulator
Athanor Portable Gas Water Heater Califont Specifications:
- Gas Input: 1/2” Connection (with pre-fitted adaptor)
- Gas Pressure: 2.8kPa
- Approval: GMK10498
- Max. Water Temperature: 50°C (+/-3°C)
- Water Connection: 1/2” (input/output)
- Water Pressure: 0.02MPa (min), 1.0MPa (max)
- Flow rate: 6 LPM (Litres Per Minute)
- Dimensions: 440 x 300 x 130mm
Note: This product must be protected from the elements.
Athanor Portable Gas Water Heater Manual
It is important to select the size of the califont to match the existing water pressure and the demand. A large califont on a low-pressure supply will not be able to supply water at the pressure indicated on the califont. Conversely, a small califont with too much incoming water pressure will not be able to keep up with heating.
To ensure the match, you need to measure your available water pressure before installing the califont. You might be able to utilise a pressure-reducing valve to reduce pressure or a pump to increase pressure. Generally, a 20-40psi water pressure is recommended for small capacity califont (10L and below) and up to 70 psi for our 12L and 16L.
Please Note - Installation:
It is very important to understand that only califonts installed per the manufacturer's instructions by a qualified installer will be warrantable. Additionally, installing them in other ways may cause a risk of fire and explosion. This may also void your insurance.
Specifically, changing the electrical wiring system, potentially creating a spark and ignition risk near where the gas piping system is going into the unit, creates the potential for a fire if there is any gas leak. If you have an installer wanting to change anything from standard, please ensure they are qualified to do so and prepared to warranty and back up their work should something go wrong.
Please note that actual product may vary from photo provided by supplier.
