Icom AT-130 Automatic Tuner Unit for SSB Radios

Automatic tuner for your high frequency transceiver

Improve the performance of your transceiver using the Icom AT-130 Automatic Tuner Unit. This unit works with any kind of vessel, no matter what size. With its automatic tuning feature, setting this up is as easy as 1-2-3. All you have to do is plug it into your transceiver, push the tune switch and voila! You are good to go.

Icom AT-130 Automatic Tuner Unit Features:

• Easy to setup
  
• Matches any frequency on every HF marine band
  
• Stores up to 45 frequencies
  
• Backs up the contents of your memory with its super capacitor
  
• Weather resistant
  
• Low tune-up power
  
• CAT1 Survey Approved
  
• 2 years warranty

Specifications:

• Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)
  
• Weight: 2.7 kg; 6.0 lb
  
• Usable Temperature Range: -30C ~ +60C
  
• Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)
  
• Current Drain (at 13.6 V DC): 2 A
  
• Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)
  
• Input Impedance: 50 ohms (unbalanced)
  
• Max. Input Power: 150 W (PEP)
  
• Input Power During Tuning: 10 W
  
• Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)
  
• Auto Tuning Accuracy: VSWR 2.0:1
  
• Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)

Icom AT-130 Automatic Tuner Unit Instruction Manual