Everything you need to set up your own live bait tank
A lure will catch you fish, but nothing sets a feeding frenzy
faster than using live bait. And when it comes to live bait, the
fresher the better! Looking to install a live bait tank on your
boat without breaking the bank? Assemble it yourself and save that
extra cash for a new rod!
The DIY Hi-Tech Live Bait Kit has everything
you need to assemble and install a live bait tank on your
boat!
Kit Includes:
- 1 x Hi-Tech Live Bait Tank 30L
- 1 x Seaflo Bilge Pump 12v 500GPH
- 1 x Transom Mounting Bracket for Live Bait Pump
- 1 x Access Hatch 375mm x 270mm
- 1 x Bung with Base 25.4mm x 59.2mm
- 1 x Seaflo Drain Socket 3/4''
The Live Bait Tank
There's nothing like fresh bait when it comes to catching the best
fish. So keep them fresh inside the
Hi-Tech Live Bait
Tank. It's made from the highest quality LMDPE (Linear
Medium Density Polyethylene) High Impact Polymer and moulded in one
piece with no seams for years of service. And what's more it's
UV-stabilised to prevent discolouration, distortion and cracking.
Plus it meets New Zealand and Australia standards so you know
you're getting one of the best live tanks available in the market
today.
The Bilge Pump
The
Seaflo Bilge Pump 1100 Series is a submersible
bilge pump fitted with a stainless steel shaft and a heavy-duty
motor with an impact-resistant ABS housing. It features a snap-lock
strainer base for easy installation.
The Mounting Bracket
This
Transom Mounting Bracket for Live Bait Pump
is a stainless steel, heavy-duty bracket with an intake pipe to
feed water up to the pump. The pipe sits under the hull line so
water is still fed to pump when your boat is underway or on the
plane. Custom-designed to work with Seaflo 1100 bilge pumps.
Other Accessories
Access Hatch
This
Access Hatch features a low-profile design
with radiused corners, clean-skirted edges and hidden fasteners. It
features UV stabilised ABS construction with a non-skid surface -
specially made to suit the harshest marine conditions. Plus, it
comes with integral 180° hinges with a slam or cam latch system to
assure perfect alignment and ease of installation.
Bung and Base
This
Bung and Base Complete Set will not jar loose
- and forms a vacuum tight seal around the mouth of a drain. The
bung is made of nylon, protecting against rust and particle
build-up. It also features a quick-turn coarse thread for a secure
fit. Install this bung and base set for quick and easy drainage. No
more uneven seals and leaky drains!
Drain Socket
Give your drain holes a nice, clean look with the
Seaflo
Plastic Skin Fitting. Made from UV stabilised, anti-aging
ABS plastic suitable for marine use, plus it makes your drain holes
easier to clean.
Hi-Tech Live Bait Tank Features:
- Model number: LBT09
- Made of LMDPE (Linear Medium Density Polyethylene) High Impact
Polymer
- UV stabilised
- One piece moulded plastic (no seams)
- 30L capacity
- Dimensions (L x W x D): 390 x 290 x 390mm (approx
30ltrs)
- Plastic approx. 3mm thick
Note: This product doesn't come with a lid.
Ideal for customising your own live bait tank and lid.
Seaflo Bilge Pump 1100 Series Features:
- High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters
/ hour)
- Small size, high efficiency, low current (low cost switching
power supply supporting)
- Unique automatic "discharge" function can bear the long-term
continuous operation under nearly congestion condition
- Impact-resistant ABS housing
- Heavy-duty motor with stainless steel shaft and tough,
thermoplastic body
- Totally submersible and ignition protected
- Water cooled motors for long life
- Anti airlock design
- Moisture tight seals
- Snap-lock strainer base for easy installation and removal and
silent vibration free running
- No burn out if it runs dry
Seaflo Bilge Pump 1100 Series Specifications:
- Flow rate: 500GPH
- Voltage: 12V
- Current: 2.2A
- Head: 3m
- Wire lead: 1m
- Outlet diameter: 19mm/3/4’’
- Weight (n.w./g.w.): 0.33/0.40kg
Transom Mounting Bracket for Live Bait Pump
Features:
- Mounts Seaflo bilge pumps to the transom
- Material: heavy-duty stainless steel
- Integral water scoop
- Used to feed water up to live bait tanks, tuna tubes
etc.
- Pipe sits under hull line so water is still fed to pump when
boat is underway / on the plane.
- Designed to work with the Seaflo 1100 pumps but could easily be
adapted to suit other pumps
- Dimensions (WxD): 100 x 80mm
- Intake pipe diameter: 15mm
Boat Access Hatch - Square Features:
- Corrosion free synthetic fittings and durable rubber
seals
- Low profile hatch, designed for installation on internal or
external flat surface
- Heavy duty, UV stabilised white ABS construction
- ABS Anti-aging, Anti-ultraviolet
- Reinforced lid with non-skid surface
- The lid hinges 180° and completely covers the mounting flange
for an attractive flush finish
- Rubber seal ensures weatherproofing when mounted on vertical
surfaces
- Supplied with 2 strong recessed handles
- Easy to install, pre-drilled countersunk fastening holes
(screws not included)
- Easy “click-in”construction
Boat Access Hatch - Square Specifications:
- Colour: White
- Dimensions: 16 x 12 x 6in
- External dimensions: 14.75in x 10.6in (375mm x 270mm)
- Opening dimensions: 11.4in x 7.5in (291mm x 192mm)
- Weight: 4lbs
Bung and Base Complete Set Features:
- Heavy-duty bung set
- Material: Nylon and Fibre
- Colour: Black
- For quick and easy drainage
- Dimensions (DxL): 25.4. x 59.2mm (Large)
Seaflo Plastic Skin Fitting Features:
- Heavy duty, UV stabilised white ABS construction
- Sizes: 3/4"
- Dimensions: 80 x 50.5mm
- Colour: White