JL Audio MX500/4 4-Channel Class D Full-Range Amplifier 500W

Compact and powerful

Engineered specifically for powersports applications, the JL Audio MX500/4 4-Channel Class D Full-Range Amplifier employs high-speed NexD switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminium chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.

Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.

Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.

This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.

JL Audio MX500/4 4-Channel Class D Full-Range Amplifier Specifications:

• Frequency Response: 20 Hz - 20 kHz (+0, -1dB)
• S/N Ratio, referred to highest rated power: >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W: >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω: >92 / 50 Hz
• Damping Factor @ 2 Ω: >43 / 50 Hz
• THD+N (Total Harmonic Distortion plus Noise) @ Rated Power: <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs: Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
• Min.Copper Power / Ground Wire Gauge: 4 AWG wire
• Fuse Rating: 50 A (AFS, AGU or MaxiFuse)
• Dimensions (HxWxD): 45 x 237 x 115mm (1.77 x 9.33 x 4.50in)