J-B Weld HighHeat Temperature Resistant Epoxy Putty

Stands out at high temperature applications

The J-B Weld HighHeat Temperature Resistant Epoxy Putty is a hand-mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in colour. It's able to withstand continuous heat exposure of 400ºF and intermittent heat exposure to 550ºF. So when the going gets though, the J-B Weld HighHeat Temperature Resistant Epoxy Putty will do the job.

J-B Weld HighHeat Temperature Resistant Epoxy Putty

• Easy to use
  
• Specifically formulated to bond and repair materials that will be exposed to high temperatures
  
• Little to no shrinkage
  
• Industrial-strength
  
• Able to withstand continuous heat exposure of 400ºF and intermittent heat exposure to 550ºF
  
• Strength: 800 PSI at Room Temp. 600 PSI at 400ºF
  
• Set Time: 1 Hour
  
• Functional Cure: 8 Hours
  
• Dries Machine Grey
  

Instructions:

• Cut: Remove required amount of putty.
  
• Mix: Thoroughly knead putty with fingers to a uniform colour.
  
• Apply: Press putty firmly to the surface to be repaired.
  

Note: For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.