Hella Marine EuroLED 115 Downlight with Switch

The Hella Marine EuroLED 115 Downlight with Switch provide a viable alternative to 20W incandescent lamps and offer substantial energy saving on board. Designed and manufactured in New Zealand, EuroLED 115mm LED downlights provide wide spread illumination with class leading colour rendering and interior enhancing colour temperatures in white (5000K) or warm white (3000K). Power consumption is less than 4.5W per lamp (less than 0.37A@12V/ 0.18A@24V) offering substantial power saving and heat reduction onboard compared to incandescent lighting.

Hella Marine EuroLED 115 Downlight with Switch requires no remote drivers or control wires, simply connect the positive and negative cables to 12V or 24V DC systems. Each lamp operates on an input voltage between 10-33V DC and can also be fully dimmed and controlled via PWM based products such as the Hella marine 2 Group Light Dimmer (5XA 998 572-001). Hella marine LED downlights represent the very latest in class leading energy efficiency and maintenance free fit and forget technology.

Hella Marine EuroLED 115 Downlight with Switch Features:

• Internal Multivolt electronics provide robust reverse polarity, spoke and over-voltage protection for ongoing reliability
  
• Can be installed almost anywhere onboard, interior or exterior, wet or dry
  
• The low heat signature will not cause damage to surrounding materials
  
• Supplied with a spacer ring, can be surface or recessed mounted making
  
• Compatible with a broad range of applications and installations
  
• ON/OFF rocker switch integrated into the side of the housing
  
• Maintenance free fit and forget technology

Hella Marine EuroLED 115 Downlight with Switch Specifications:

• Lens Material: UV resistant enhanced impact acrylic
  
• Rim Material: UV resistant plastic. 316 stainless steel.
  
• Colour Temperature: 5000K (White)
  
• Dimming: PWM. eg Via to Hella marine 5XA 998 572-001
  
• Cable: Pre-wired with 500mm twin core marine cable
  
• Operating Voltage: 10-33V DC
  
• Power Consumption: less than 4.5W ( less than 0.37A @ 12V / 0.18A @ 24V )
  
• Degree of Protection: IP 67 - Completely sealed
  
• Weight: 170g (including cable)
  
• Installation: Recess into 90mm cutout. Surface mount via spacer
  
• Approvals: CE
  
• Manufacturing Location: New Zealand