CRC Minute Mend Epoxy Putty 114g

For quick and easy permanent repair

The CRC Minute Mend Epoxy Putty is a versatile epoxy putty packaged in a convenient one piece stick for immediate, permanent repairs. It can be used to reshape, rebuild or permanently repair a variety of surfaces and applications. It's hand-kneadable and mixes in just one minute. Minute Mend is ideal to permanently repair scratches, gouges and holes, to perform routine electrical jobs and to stops leaks. It can be used for plumbing, electrical, ceramic, vehicle and machinery repair

Once fully cured Minute Mend epoxy putty can be sanded, filed, tapped, sawed, drilled, machined, stained or painted. It also bonds to both wet and dry surfaces.

CRC Minute Mend Epoxy Putty Features:

• Convenient - Easy, no mess and is ready to use in less than one minute
  
• Multiple Uses - Ideal to reshape, rebuild, or permanently repair a variety of surfaces and applications
  
• Cures steel hard
  
• Will not sag, run or drip
  
• Good adhesive strength
  
• Good gap filling properties
  
• Excellent anchoring properties
  
• Versatile - Bonds tenaciously to fiberglass, metal, wood, steel, aluminium, concrete, ceramic, plastic and glass
  
• Specially Formulated - Bonds to both wet and dry surfaces and can be applied under water
  
• After full cure, Minute Mend epoxy putty can be sanded, tapped, sawed, drilled, machined, stained or painted
  
• Heat resistant to 120?C continuously or 177?C intermittently
  
• No Fire or Flash Point - Safe for use in many applications
  
• M.S.D.[L.]-Material Safety Data Label Provides instant access to current safety information should an accident or OSHA inspection occur. Helps comply with OSHA Hazard Communications Standard 29 CFR 1910.1200
  

CRC Minute Mend Epoxy Putty Specifications:

• Appearance: Grey/green 2-Part epoxy stick
  
• Working Life: 30 minutes
  
• Full Cure: 24 hours
  
• Specific Gravity: 1.9
  
• Shore D hardness (full cure): 75
  
• Lap shear tensile strength on steel: 800-1000 lbs
  
• Temperature limitations: 120 degrees C continuous, 177 degrees C intermittent
  
• Electrical resistance: 30,000 megaohms
  
• ASTM D-149 (Dielectrical Strength): 300 volts/mil
  
• Shrinkage: Less than 1%
  
• Chemical Resistance: Ketone, alcohol, halogenated hydrocarbon, esters, aqueous salt solution, dilute acidic/basic solution
  

Applications:

• Permanently repair scratches, gouges and holes in drums, tanks, castings, molds, sinks, tubs and leaky gaskets
  
• Perform routine electrical jobs such as mounting terminal blocks, packing wires and repairing breaker boxes
  
• Seal and stop leaks, even under water - Gutters, downpipes etc
  
• Use in plumbing, electrical, ceramic, as well as vehicle and machinery repair
  
• Repair and replace - Timber, metal, masonry, many plastics and ceramics
  
• Mend - Appliances, sports equipment, toys etc
  
• Patch - Chipped concrete, bricks, floors, blocks
  
• Form - Missing parts, knobs
  
• Anchor - Screws, housings, bolts
  
• Attach - Signs, fixtures
  
• Balance table/chair/desk legs