CRC Maniseal Exhaust Cement Brown 530g

Seals in all noxious fumes

CRC Maniseal Exhaust Cement is a sodium silicate based sealer for mufflers and tailpipes that resists high temperatures. It expands and sets when heated, ensuring a perfect seal against carbon monoxide and other noxious fumes.

Brown Exhaust Cement
CRC Maniseal BROWN Exhaust Cement is a sealing and gasketing compound designed exclusively for use in assembly of Automotive Exhaust Systems.

CRC Maniseal Exhaust Cement Features:

• Bridges gaps and imperfections in exhaust clamping areas
  
• Seals out poisonous fumes
  
• High temperature resistance - Up to 300 °C
  
• Contains no asbestos
  
• Cleans up in water
  
• Ready to use - No mixing required, easy to use
  
• Uses: Recommended for mufflers, tailpipes, joints, catalytic converters.
  -At the Manifold: Some modern cars do not have manifold gaskets. CRC Maniseal takes the place of a gasket.
  -At the Exhaust Flange: CRC Maniseal spread between the faces and in the 'V' of the clamp makes a highly satisfactory seal.
  -At the Muffler: When the muffler is renewed and clamped in, the annoyance of a leak and subsequent waste of time will be -avoided if CRC Maniseal is smeared over the pipes before fitting.
  -Industrial Use: Kiln Repairs - thoroughly wet damaged area, force CRC Maniseal into cracks, gaps etc and smooth over with fingers.
  

CRC Maniseal Exhaust Cement Specifications:

• Chemical type: Sodium silicate
  
• Appearance: Cream paste
  
• Odour: Odourless
  
• Specific Gravity: 1.8
  
• Viscosity: Heavy Paste
  
• Flash Point: None
  
• Typical Curing Performance: Cures by the evaporation of water and further cures with heat. Full cure will be affected after 24 hours of drying and driving at the maximum operation temperature.
  
• Temperature Resistance: 300 degrees C continuous
  
• Chemical/Solvent Resistance: The fully cured product retains effective properties when in contact with water.