Thermaltronics TMT-2000S-K ESD Safe Soldering Station 55W 470kHz
Thermaltronics TMT-2000S-K ESD Safe Soldering Station 55W 470kHz
Buy now, pay later & Finance Options
Find Local Store
This outstanding new soldering station uses a proven technology, Curie point temperature sensing with a new twist. The tip is heated by RF induction to bring the tip up to operating temp. The soldering iron tip is a heater. Older Curie point soldering irons like the famous Weller W-TCP used a separate Curie-switch, heater and tip. There are thermocouples, varistors or other temp sensors that only complicate things. The thermal inertia with the Thermaltronics product is far lower.
The system consists of the base power unit which connects to mains 240V. The soldering pencil accepts a cartridge tip (which is also the heating element) and a burn-proof silicon rubber cord. The third element in the system is the pencil iron stand. This stand features a dry'-type tip cleaner which is made from machine curled brass and also a standard sulphide free tip sponge.
Features:- 0.5mm Conical tip supplied standard
- Low power idle
- Under 10 second heat-up
- Rapid recovery from soldering load. No overshoot
- No calibration needed
- ESD rated
- Can work leaded and unleaded solder
Specifications:
- Recommended use: Serious Hobbyist/Trade/Industrial
- ESD rated: Yes
- Lead-free rated: Yes
- Power: 50W
- Temperature range: 350 degreesC to 398 degreesC
- Output Frequency: 470kHz
- Tip to GND Resistance: <2 Ohms DC
- Tip to GND Potential: 2mW, true RMS 50 - 500Hz
- Dimensions: 155(H) x 110(W) x 92(D)mm
- Weight: 1.3kg