Gear Aid Tenacious Tape Circular Repair Patches 7.62cm

So much better than duct tape!

The Gear Aid Tenacious Tape Circular Repair Patches are ideal repairing rips, holes and gashes in almost all of your outdoor gear. It stays put no matter what Mother Nature dishes out and leaves no sticky mess. The repair patches come in black nylon and clear for nearly-invisible repairs. Try that with duct tape!

Toss Gear Aid Tenacious Tape Circular Repair Patches in your outdoor gear kit for a little extra peace of mind. Each pack contains 2 black nylon round repair patches and 2 clear round repair patches for a total of 4. Repairs tents, camping gear, sleeping bags and pads, vinyl rafts —whatever needs a quick patch, so you can stay outside.

If you're serious about your gear, step up to Gear Aid Tenacious Tape Circular Repair Patches - and you’ll never go back to that gooey, sticky, silver stuff!

Gear Aid Tenacious Tape Circular Repair Patch Application:

• Begin by cleaning the repair area with isopropyl alcohol to remove any dirt or body oils which may prevent a good bond. Trim any loose threads.
• Apply the Tenacious Tape patch over the rip, tear or hole.
• Smooth out any bubbles and ensure the edges lay flat. The adhesive will reach full strength after 24 hours.
• For large holes, repeat the above steps on the opposite side of the fabric.

Gear Aid Tenacious Tape Circular Repair Patch Fabric Types:

• Nylon
• Polyester
• Vinyl
• Canvas
• Rubber
• Bicast Leather (PU Leather)
• Non-Oiled Leather
• Neoprene
• Vinyl Plastic (PVC)
• TPU
• EVA Plastic
• PET Plastic
• OPP Plastic
• CORDURA
• Sunbrella
• WINDSTOPPER

Gear Aid Tenacious Tape Circular Repair Patch Features:

• 7.62cm (3") circular repair patches
• Includes: 2 round black patches, 2 round clear patches for a total of 4
• Lightweight, compact and nearly invisible
• Clear repair patch utilises PVC fabric
• Black repair patch utilises a taslan nylon fabric
• Ultra-aggressive adhesive can be applied with finger pressure
• Tape can be moved or repositioned within 24 hours without leaving behind a sticky residue
• Sticks to almost any surface
• Can be used on silnylon for a temporary emergency field repair
• Acts as an abrasion-resistant shield on high-wear areas
• Optimal operating temperature for initial adhesion = 50~104°F (10~40ºC)
• Machine washable

Note: Place unused patches in included bag and store in a cool, dry place.