White LED Easy Fit Gen 2 Step Lamp

Set and forget

The White LED Easy Fit Gen 2 Step Lamp offers attractive and timeless LED courtesy lighting for a wide variety of interior and exterior lighting applications. Light is radiated downward at an angle of 30 degrees making these lamps ideal for illuminating on board areas such as steps, stairs, toe kicks, storage areas, companion ways, deck fittings, signs and switches.

Multivolt electronics ensure constant light output in 12V or 24V DC systems. Easy Fit series lamps are completely sealed, shock and vibration resistant and represent reliable 'fit and forget' technology.

Gen 2
The new Easy Fit features a new design incorporating new electronics and LED technology. Size is still the same but the mounting method has changed slightly. The Gen 2 features better light output, modern surface mount LED design and clip-on cover. These improvements allow for reduced power consumption, increased efficiency and reduction of potential water ingress.

White LED Easy Fit Gen 2 Step Lamp Features:

• Significant power savings
  
• Precision optics
  
• Glare diffusion
  
• LED technology and efficiency
  
• Outstanding durability
  
• Waterproof, impact and shock resistance
  
• Multivolt circuitry for consistent illumination across a range of input voltages, even under severe voltage fluctuations
  

White LED Easy Fit Gen 2 Step Lamp Specifications:

• Lens Material: UV resistant enhanced impact acrylic
  
• Cap Material: White plastic, chrome plated plastic, polished 316 stainless steel
  
• Cable: Pre-wired with 100mm marine cable
  
• Voltage: Multivolt for optimum brightness in 12 and 24 volt systems
  
• Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
  
• Degree of Protection: IP67 - Completely Sealed
  
• Weight: Stainless Cap - 30g (Including cable) Plastic Cap - 15g (Including cable)
  
• Approvals: CE, RCM

Note: Gen 2 Easy Fit lamps no longer have the two open slots for mounting the original caps. This improves water tightness when installed in wet areas like cockpits. Each lamp is pre-wired with 100mm of marine cable and supplied with stainless steel screws. Optic appears clear until illuminated.