Seaflo Bilge Pump 1100 Series

Tough enough for any bilge

Get rid of accumulated water in the bilge in no time with the Seaflo Bilge Pump 1100 Series. This submersible bilge pump is fitted with a stainless steel shaft and a heavy-duty motor with an impact-resistant ABS housing. Plus, the snap-lock strainer base makes installation and removal a breeze. The 1100 series is available in 350, 500, 750 and 110 gallons per hour flow rates - perfect for general use. It's comforting to know that if your boat takes on water, you can pump it out fast.

Seaflo Bilge Pump 1100 Series Features:

• High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters / hour)
  
• Small size, high efficiency, low current (low cost switching power supply supporting)
  
• Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition
  
• Impact-resistant ABS housing
  
• Heavy-duty motor with stainless steel shaft and tough, thermoplastic body
  
• Totally submersible and ignition protected
  
• Water cooled motors for long life
  
• Anti airlock design
  
• Moisture tight seals
  
• Snap-lock strainer base for easy installation and removal and silent vibration free running
  
• No burn out if it runs dry
  

Seaflo Bilge Pump 1100 Series Specifications:

Model	Flow Rate (GPH)	Volts (V)	Current (A)	Head (M)	Wire Lead (M)	Outlet Diameter	N.W/G.W (Kg)
SFBP1-G350-01	350GPH	12V	1.8A	3m	1m	19mm/3/4’’	0.33/0.40kg
SFBP1-G500-01	500GPH	12V	2.2A	3m	1m	19mm/3/4’’	0.33/0.40kg
SFBP1-G750-01	750GPH	12V	2.5A	3m	1m	19mm/3/4’’	0.33/0.40kg
SFBP1-G1100-01	1100GPH	12V	3.0A	4m	1m	29mm/1-1/8’’	0.38/0.44kg
SFBP2-G1100-01	1100GPH	24V	1.5A	4m	1m	29mm/1-1/8’’	0.38/0.44kg