CruzPro FU-60 Fuel Gauge and Consumption Calculator

#9090998
Warranty Badge - 12-Months
Hurry! 1 left in stock - Ready to Ship
Calculate Shipping
Australia Wide
includes any items in cart
ONLY $409.00

Seen a lower price? Ask us to beat it

Add Items to Cart

Click on the image above to view full picture

More Views

Details

Details

Never worry about running out of fuel again

The CruzPro FU-60 Fuel Gauge and Consumption Calculator has a unique ability to compensate for odd-shaped tanks often found in boats. It calculates the true fuel reading over the entire range from full to empty.

CruzPro FU-60 Fuel Gauge and Consumption Calculator Features:
  • Display fuel remaining (in gallons, liters %), trip fuel used, total fuel used, fuel consumption rate, Time-To-Go at current consumption rate
  • Trip fuel used, ideal for joint ownership boats
  • Low and High fuel alarms can be set over the entire tank level range. When activated, the FU-60 built-in 85 dB alarm will sound and the display will flash. Enabled or disabled with a single key press
  • The intelligence calculates the fuel usage form the tank level removing the need for an expensive flow rate sender and a subtractor unit to compensate for diesel bypass
  • Can be individually calibrated to any shape tank. The calibration data is saved into a non-volatile memory which retains the information if the power is turned off
  • Intelligent CruzPro gauges regulate the battery feed voltage to get highly accurate sender readings free from voltage fluctuation errors
  • Works with both petrol and diesel engines
  • Works with standard fuel senders: VDO, Teleflex, Faria, GM, Stewart-Warner, Centroid THREE terminal senders, Aerotech and others
  • Up to five levels of back-lighting
  • NMEA 0183 serial data output line or an external alarm output that can be used for fuel transfer pump control
  • Operating voltage 9.5 to 33 volts
  • Round bezel

CruzPro FU-60 Fuel Gauge and Consumption Calculator Specifications:
  • Operating Voltage: 9.5 - 33.0 VDC
  • Current Drain: 0.018 amps nominal
  • Accuracy: Better than 2% (trainable)
  • Data Editor: Fuel level data editor. Fuel sender resistance data editor. Data editor can be used to manually enter fuel calibration data or to correct an existing calibration curve
  • Display: 4 digit LCD, 5 levels of backlighting
  • Displayed Data: Fuel remaining, trip fuel used, total fuel used, consumption rate (gal/liters per hr), Time-To-Go (at current consumption rate) before fuel gone
  • Inputs: Works with all popular fuel senders, both American and European standards (Centroid THREE terminal senders, Faria, GM, VDO, Teleflex, Stewart-Warner, etc.)
  • Manufactured to work with any standard resistance type level sender having the following resistance ranges: 0-30, 0-70, 0-90, 10-73, 10-180, 33-240, 40-250 ohms (and their reverse 30-0, 70-0, 90-0, 73-10, 180-10, 240-33, 250-40 ohms). The FU60 will actually also work with any non-standard resistive sender that varies from a minimum of 0 ohms to a maximum of 300 ohms or a maximum of 300 ohms to a minimum of 0 ohms. For example, a resistive sender that varies in resistance from 100 to 150 ohms would work. So would a sender that varies from 75 ohms to 25 ohms. The FU60 can also be ordered from the factory set to work with 4-20mA senders or 0-5V sender, as a special order item.
  • External Outputs/Alarms: Output screw terminal user programmable for choice of: NMEA 0183 serial External Alarm Output Day tank fuel transfer pump control
  • NMEA 0183 Data: Fuel Remaining Trip Fuel Used Total Fuel Used (Required to fill the tank) Fuel Consumption Rate Time to Go (before you run out of fuel)
  • Alarms: Built-in 85 dB audible alarm. Settable Low and High fuel alarms
  • Fuel Transfer Pump Control: Programmable lower fuel level limit to turn ON a fuel transfer pump. Programmable upper fuel level limit to turn OFF the fuel transfer pump
  • Size: 2.5'' dia X 4.1'' deep (61mm x 104mm)
  • Mounting: 2-1/8'' (55mm) round hole

Products You Recently Viewed

Recently Viewed