CruzPro CT-60 Digital Clock and Timer - Round Bezel

Durable and accurate

The CruzPro CT-60 Digital Clock and Timer provides accurate low cost display of time, race and watch timers. With a press of the button, you can display time-of-day, a down-counting race timer or start/reset/re-start a watch timer. Both race and watch timers count up after reaching zero and both are easily programmed.

The time-of-day clock has 8 different programmable alarms for all those radio schedules, weather fax warnings, etc. The clock can be set for 12 or 24 hour display format and is accurate to better than 5 seconds per day.

When used as a Watch Timer, the CT60 is programmable with a time interval anywhere from 1 second to 99 minutes and 59 seconds. 85 dB alarm output, with quiet click warning.

The CT60 has a large LCD display yet draws only 0.018 amps. 5 levels of backlight (including OFF) can be selected from the front panel. Connect a GPS output into the CT60 and the CruzPro CT60 will auto-set to the correct time whenever GPS NMEA 0183 is available. The CT60 outputs NMEA 0183 serial data.

CruzPro CT-60 Digital Clock and Timer Specifications:

• Operating Voltage: 9.5 - 33.0 VDC
• Current Drain: 0.018 amps nominal
• Operating Temperature: 32 to 122 deg F (0 to 50C)
• Display: 4 digit LCD, 5 levels of backlighting
• Data: Time of Day, Programmable Race and Watch Timers
• Ranges: 12 or 24 hour display format
• Accuracy: Better than 1 second/day Front panel adjustable
• GPS input: Will auto set to GPS time whenever GPS NMEA 0183 signal available
• Data Output: NMEA 0183 serial 4800 BAUD
• Size: 2.5'' dia X 4.1'' deep (61mm x 104mm)
• Mounting: 2-1/8'' (55mm) round hole
• Round Bezel

CruzPro CT-60 Digital Clock and Timer Owner's Manual