PropOne Prop Wash Metal Cleaner 250ml

#9180508
Warranty Badge - 12-Months
In Stock - Ready to Ship
Calculate Shipping
Australia Wide
includes any items in cart
ONLY $23.99

Seen a lower price? Ask us to beat it

Add Items to Cart

Click on the image above to view full picture

Details

Details

Removes contamination you can't see

Get the best out of your PropOne application! Use PropOne Prop Wash Metal Cleaner to thoroughly clean your metal surfaces. Prop Wash is a metal cleaner for use on bronze and stainless steel which removes contamination you can't see to properly prepare metal surfaces for the PropOne: Foul Release Coating System

PropOne Prop Wash Metal Cleaner Features:
  • Recommended preparation cleaner before PropOne application
  • Necessary for new or reconditioned metal surfaces
  • Removes contaminants you can't see, improving PropOne system adhesion
  • Brightens underwater metals, leaving them looking brand new

Application:

Surface Preparation
  1. Remove marine growth and existing coatings from metal surfaces.
  2. Abrade the metal with a mechanical grinder, wire wheel or by hand sanding (80-120Grit).
  3. For newly polished/repaired metals, abrade the metal surfaces to remove any slight surface oxidisation.
  4. Rinse metal surfaces with clean fresh water, ensuring that any abrasive residue is fully removed.
Surface Cleaning:
  1. Apply Prop Wash using a clean cloth to scrub the surface. Do not allow to dry.
  2. Rinse surface with clean fresh water and wipe with a clean damp white cloth.
  3. Repeat until cloth shows no discolouration.
  4. Solvent wipe metal surfaces with acetone using a separate clean cloth.
  5. Keep metal surfaces dry and free from contaminants, do not touch surface.
  6. Continue with PropOne foul release coating application
  7. 250ml
Note: Do not use on anodes or polished metal surfaces.

Products You Recently Viewed

Recently Viewed