CruzPro PY-60 1200deg C Pyrometer
CruzPro PY-60 1200deg C Pyrometer
Buy now, pay later & Finance Options
Find Local Store
The PY60 pyrometer displays engine exhaust gas temperature.
With a press of the button you can display exhaust gas temperature, High and Low temperature alarm set-points, and Maximum temperature seen since last reset.
Low and High temperature alarms can be set over the full range. When activated, the built-in 85 dB alarm will sound and the display will flash. The alarms can be enabled or disabled with a single key press.
Display in degrees F or C.
The PY60 outputs temperature on the standard NMEA 0183 serial data line. This information can be used to log performance or duplicate the display information at a remote location on the CruzPro RP30, RP110 and MaxRP110 data repeaters.
5 levels of backlight (including OFF) can be selected from the front panel.
Comes with an 1100 deg C type K thermocouple.
The units are factory calibrated, if required this can be adjusted over a wide range using the front-panel switches to suit your particular needs. All calibration data is saved to non-volatile memory and will stay when the power is removed.
Available with round or square bezels.
The PY60 draws only 0.017 amps, 6.5 to 30.0 VDC
Specifications:- Operating Voltage: 9.5 - 33.0 VDC
- Current Drain: 0.018 amps nominal
- Display: 4 digit LCD, 5 levels of backlighting
- Data: Temperature 32 to 2000 degrees F (0 to 1100 deg C) +/- 1% Maximum Temperature seen memory
- Inputs: Thermocouple (type K provided)
- Data Ouput: NMEA 0183 serial 4800 BAUD
- Alarms: Built-in 85 dB audible alarm. Settable high and low temperature alarms
- Size: 2.5''' dia X 4.1''' deep (61mm x 104mm)
- Mounting: 2-1/8''' (55mm) round hole
User Manual