Attwood Tsunami MK2 T800 Manual Bilge Pump 800GPH 12V

The only manual bilge pump that eliminates air-locks

The Attwood Tsunami MK2 T800 Manual Bilge Pump uses the patented X-Air Impeller to eject trapped air in the pump and pipework. This means that the pump will not dry and burn out. It's also the easiest manual bilge pump to install and service. External mounting feet and integrated outlet eliminates the need to remove the basket, and the service pump cartridge can be easily accessed singlehandedly. Plus, its universal mounting pattern makes replacement simple.

Attwood Tsunami MK2 T800 Manual Bilge Pump Features:

• Patented X-Air Impeller
• Prevents air locking so that the pump will not run dry and burn out
• 90 degree rotatable elbow outlet
• Can be installed anywhere in a full 360 degree orientation
• Exterior mounting feet eliminate the need to remove the basket
• Industry leading motor and shaft seals
• Enhanced protection against harmful corrosion
• No pipe or hose removal required
• Single hand pump cartridge release
• Tricuspid check valve
• Helps prevent water from backflowing through the pump

Attwood Tsunami MK2 T800 Manual Bilge Pump Specifications:

• Model: T800
• Output: 800GPH
• Dimensions: 114 x 101mm
• Hose diameter: 3/4 and 1in
• Fuse size: 4 Amp
• Minimum water level: 10mm
• IP rating: IP68
• Certifications:
  
  • Bilge Pump Standards: ABYC H-22, ISO 8849, ISO 15083
  • Ignition Protection Standards: ISO 8846 Marine
  • Marine Electrical Wiring Standards: ABYC E-11, ISO 10133
  • Approvals: NMMA “As approved Listing”; CE; RCM; UKCA

Attwood Tsunami MK2 Bilge Pump Data Sheet