Viper Pro-Series Rapid Drum Winch Bundle with 100mx6mm Double Rope and Chain

Perfect blend of power and speed

The Viper Pro-Series Rapid Drum Winch sets the bar high with industry-leading features and premium-quality componentry. Utilising a 1000W submersible motor, the Rapid boasts a fall rate of over 50 meters per minute and a retrieval rate of 45 meters per minute. You’ll be sure to hit your GPS mark each and every time!

Emergency Manual Release Safety
The emergency manual release feature enables you to deploy your anchor if your boat has lost all power and is heading for a cliff, sandbank or bar crossing, you can lower your anchor even without power. It makes sure you can safely anchor your boat and avoid dangerous drifting. Once the anchor is on the bottom, tie your rope to a bollard to be safely anchored. Then you can call the coast guard or your local emergency marine service.

Unsurpassed Viper Reliability
The Viper Pro-Series Rapid Drum Winch has more torque than a conventional drum winch, 3 support bearings hugging a 28mm 1 piece solid shaft and a 90-degree welded housing bracket which closes up the gap between your drum (preventing rope jams) and does not require any additional guards. It’s constructed from 8mm plate 316 marine grade stainless steel (hand polished to a mirror finish) and comes standard with a bulletproof 5-year Viper performance warranty. You can’t go past a Viper!

Everything You Need
The Viper Rapid comes with everything you need to install it, including a 5mm stainless steel sandwich plate, all required stainless steel bolts, screws, nylocs, washers, 2 face plates and a rope chain. The winch is also bundled with 100m of 6mm double braid rope, pre-spliced to 8m of 6mm galvanised short link anchor chain for a total of 108m!

Viper Pro-Series Rapid Drum Winch Features:

• Model: 30021-100
• Complete winch bundle
• Includes 1000W stainless steel submersible electric motor with IP68 certification
• 316 stainless steel marine grade worm drive gearbox
• 28mm solid stainless steel shaft with 3 support bearings
• 360 degree motor rotation
• 16 different positions
• 1m of 3 B&S tinned copper cable, fitted and leak tested
• More torque than conventional drum winch
• Constructed from 8mm plate 316 marine grade stainless steel
• Hand polished to mirror finish
• Emergency manual release
• Comes complete with fixing hardware
• 100m of 6mm Double Braid Rope
• Pre-Spliced to 8mtrs of 6mm galvanised short link anchor chain (Total 108mtrs Rope/Chain)
• Suits vessels from 5m up to 8m
• 5-year warranty

Viper Pro-Series Rapid Drum Winch Specifications:

• Max retrieval rate: 40m per min
• Max fall rate: 45m per min
• Vessel length: 5 - 8m / 16 - 26ft
• Voltage: 12V DC
• Max load: 180kg
• Working load: 75kg
• Weight: 15.6kg
• Well clearance requirement (L x W x H): 40 x 35 x 25cm
• Fixing base size: 25.5 x 12cm

What’s in the box:

• Viper Pro-Series Rapid Drum Winch
• 1000W stainless steel submersible electric motor with IP68 certification
• 100A circuit breaker
• Marine-grade 200A anchor solenoid
• Up/down LED switch with face plate
• Combo circuit breaker and switch combo face plate
• 100m x 6mm double braid rope
• 8m x 6mm galvanised short link anchor chain
• Deluxe anchor chain
• Stainless steel anchor swivel
• 5mm stainless steel sandwich plate
• All fixing hardware
• Installation instructions

Note: 3 B&S cables are already attached to the motor and leak tested to a IP68 Rating.