Airmar NMEA 2000 5-Pin DeviceNet Male Cable

For Airmar NMEA 2000 instruments

The Airmar NMEA 2000 5-Pin DeviceNet Male Cable is compatible with Airmar NMEA 2000 instruments. One end has an Airmar 5-pin connector that fits onto the base of the instrument, and the other end has a male connector for the NMEA 2000 network.

The 2m and 6m cables are for use as drop cables, where the device is mounted no more than 6m from the network backbone.

The 10m and 30m cables have an NMEA 2000 inline terminator built in to the cable, so that when you plug the cable into an Airmar device, that end of the backbone is correctly terminated without any need for a separate inline terminator. If you are using the 10m or 30m cables, these are too long to be drop cables under the NMEA 2000 standard. These longer cables should be installed so that they become one end of the network backbone.

Airmar NMEA 2000 5-Pin DeviceNet Male Cable Features:

• Compatible with: PB200, G2183, GH2183 and H2183
  
• Available lengths: 2m, 6m, 10m and 30m