Airmar B60-20-MM 600W 20-Degree Tilt Bronze Thru-Hull Transducer Mix and Match

#9129470
Warranty Badge - 12-Months
Ships Dec 25 - Jan 14
Calculate Shipping
Australia Wide
includes any items in cart
ONLY $579.00

Seen a lower price? Ask us to beat it

Add Items to Cart

Click on the image above to view full picture

More Views

The item you're looking at is currently unavailable or has limited stock, how about this one instead?
Details

Details

Low-profile tilted through-hull 600W 50/200kHz fishfinder transducer

The B60 is a standard 50/200kHz transducer available with a tilt of either 12 deg or 20 deg. The B117 is the equivalent of a B60 with zero tilt.


Specifications:
Type Standard non-CHIRP fishfinder transducer
Frequency 50 kHz / 200 kHz
Beam Width 45 degrees at 50kHz / 12 degrees at 200kHz
Power Rating 600 watts
Mounting Low-profile through-hull
Housing Bronze
Hull Aperture 2.375' (60mm)
Usable Shaft Length 2.70' (68.5mm)
Cable Length 10 meters
Mix and Match Yes
Temperature Sensor Yes
Speed Sensor ?
Retractable Insert ?
Tilted Yes
Status In production
Reference Page

Product Data Sheet
Base Models

These Mix and Match base models must be combined with a Mix and Match cable for installation. The suffix '-MM' in the Gemeco part number designates a Mix and Match base model.

Transducer Code Airmar Part # Tilt Description
B60-12-MM 31-554-2-01 12 degrees B60 Base Transducer with 12 deg Tilt
B60-20-MM 31-556-2-01 20 degrees B60 Base Transducer with 20 deg Tilt

Mix and Match Cables

This transducer uses the Mix and Match system. Installation requires two parts - a base model plus one of the Mix and Match 600W cables (MM) listed below.

Each base model has a 2 meter pigtail cable permanently attached. This cable ends in an Airmar 5-pin female connector. The Mix and Match cables are 9 meters long and have a male Airmar 5-pin connector at one end (to connect to the transducer pigtail) and a brand-specific connector at the other end (to connect to the sounder or fishfinder). If an owner changes their fishfinder or sounder, a different MM cable can be installed without disturbing the transducer itself.

Kits are sold containing a base model and a Mix and Match cable. For example, the B60-8G kit contains a base transducer and an MM-8G cable.

Cable Connector Code Airmar Part # Length Equipment
MM-0 33-480-01 9 meters Bare wire applications
MM-10FUR 33-564-01 9 meters Furuno 10-pin
MM-10N 22-860-01 9 meters Northstar 490S, 491
MM-2 33-240-02 9 meters Raymarine ST50
MM-3 33-244-01 9 meters Older Fuji 3-pin
MM-5P-5P 33-247-02 12 meters Extension cable for 600W Mix and Match
MM-6DO 33-271-01 9 meters Garmin 6-pin depth-only
MM-6DT 33-966-01 9 meters Garmin 6-pin
MM-6NAV 33-914-01 9 meters Navman/Northstar/Simrad 6-pin
MM-7 33-396-01 9 meters Older Simrad, Raytheon, JRC 7-pin
MM-8 33-898-01 9 meters Older Furuno/SiTex/Fuji 8-pin
MM-8G 33-1178-01 9 meters Garmin blue 8-pin
MM-8S 33-628-01 9 meters SiTex CVS, SVS
MM-DT-LOW 33-636-01 9 meters Lowrance/Simrad blue 7-pin
MM-FISO 33-259-01 9 meters Raymarine instruments with spade connectors
MM-HB 33-630-01 9 meters Humminbird #9
MM-RAY 33-621-01 9 meters Raymarine DSM300 and equivalent
MM-RAYA 33-622-01 9 meters Raymarine current series 6/9-pin
MM-RCA 33-238-02 9 meters Datamarine

Replacement Parts
Part Airmar Part # Description
02-133-01 Bronze Hull Nut
09-813-01 Rubber Washer
60WR-1 Crows Foot Wrench
60WR-2 Single Handle Wrench
60WR-3 Double Handle Wrench
60WR-4 Single Handle Wrench

Products You Recently Viewed

Recently Viewed